Product Name : Pleated filter

Produced by state-of-the-art facilities, media available with PP (polypropylene) micro fiber, PES (polyethersulfone) membrane or PTFE (tetrafluoroethylene) membrane, absolute filtering efficiency over 99.9%.  PureMax® pleated filter cartridges, all FDA certified and in compliance with EU Directive 2002/72/EC for plastic in food contact, suitable for various accurate filtering applications.

⊙ Features & Benefits 

* Every media with absolute rated particle retenting characteristics.

* Manufactured in clean room, high clean cartridge filter.

* Thermal bonded end-cap configuration, free binder, and fits all standard housings.

* Low pressure drop, high dirt holding capacity and long service life.

* Pre-flush with 18 megaohm-cm DI water, TOC content is lower than 40 ppb. (option)

 

⊙ Selection Guide 

Item Main filtration layer Micron rating (absolute) Applications
P  series Polypropylene micro fiber 0.2, 0.45, 1, 5, 10, 20, 50 micron DI water, cooling water (PCW), pre-filtration
E series PES (polyethersulfone) membrane 0.04, 0.1, 0.2, 0.45, 0.65, 1.2 micron Clean and rinse process, fianl filtration for F&B, DI water
F  series PTFE membrane - hydrophobic 0.05, 0.1, 0.2, 0.45, 1, 3, 10 micron acid, base solution, wet etching, solvent stripping & special photoelectro chemicals
W series PTFE membrane - hydrophilic 0.05, 0.1, 0.2, 0.45, 1, 3, 10 micron
 *Support layer(up-stream and down-stream) for all series: Polypropylene
 *Standard diameter of cartridge: 69mm, optional 80mm or 64mm available.

 

⊙ Recommended Operating Conditions

Item Max. operating pressure drop Change out ΔP Max. operating
80ºC
60ºC 20ºC temperature
P series 1.4kg/cm2 2.8kg/cm2 3.2kg/cm2 4.9kg/cm2 90ºC
E series 1.7kg/cm2 --- 4.2kg/cm2 5.5kg/cm2 80ºC
F series 1.4kg/cm2 --- 4.2kg/cm2 5.6kg/cm2 90ºC
W series 1.4kg/cm2 --- 4.2kg/cm2 5.6kg/cm2 90ºC
 *for chemical filtration, 60ºC is suggested.

 

⊙ Main filtering media

proimages/4-F2_PT_media.jpg 

 

⊙ Ordering Information

proimages/4-F1_MB_ordering.jpg